i240 Body Kit and 8x15" Wheels
- Last Updated: Saturday, 01 October 2016 15:55
- Hits: 6471
The i240 Road body kit is made by Trevor Lewis of RallyTech Composite Engineering. Trevor has supplied a lightweight version of his normal kit in black fibreglass, without bonnet and boot lid. The kit will allow me to fit 8" wide wheels under the arches, and at the same time, increase the cars track by 2".
At the rear I have only fitted the rear arches and side skirts. I have modified the rear arches to be bolt-on instead of glue-on. The rear arch is now bolted on using 13 bolts, which may be excessive, but it certainly will not flap about at speed. Each arch can be removed in less than 5 minutes, for maintenance or replacement. To allow fitting of the 8" wide wheels, the original arches have been cut back about 2" and welded up again, so that on full bump the tyres do not touch. None of this work is visible with the fibreglass arches fitted.
The side skirts are held in place by 3 welded-on brackets.
The i240 body kit is now all fitted. Here are the final pictures.